This PCV Mod consist of a few parts:-
1 Fuel Filter
Piece of Vacuum Hose
2 Hose Clamps
TOOLS:-
Hacksaw
Screwdriver
Knife
Start by cutting back the PCV, the plastic hose is cut back at the bend, the photo below show the finish product.
Cut some Vacuum Hose to fit on either side of the Filter.
Put some Hose Clamps on either side of the Filter and your done.
I would recommend to replace the Filter every 7-8 weeks if you Drag Racing as the Filter will fill up quickly.
Below is the first Filter replacement, this Filter has catch the oil that would have been burn up without this Mod.
The above Filter has been of the car for 7 weeks and 1 Drag Meeting, the Filter
was alright up till the Drag Meeting with only a very some amount of oil in it, after the
Drag Meeting and been running the car at WOT this is the final condition of the Filter.
